Minimize Disposal Costs with Our Dewatering Equipment

Park Process manufactures a wide variety of dewatering equipment

WWETT24 Showcase Product Preview

View Online  |  Unsubscribe

Park Process Dewatering Equipment Park Process manufactures a wide variety of dewatering equipment that turns large volumes of liquid waste into small volumes of solid waste, streamlining waste-hauling operations and minimizing disposal costs. In many instances, the waste hauler’s point of disposal either suddenly refuses to accept grease trap waste or raises disposal costs on septage and grease. Park Process’ equipment processes sludge to produce a dry cake acceptable at landfills. By reducing the volume of waste, Park Process dewatering products can save more than 50%, depending on local disposal costs and haul distances. Park Process offers three styles of dewatering containers: roll- off containers, permanently mounted tipping stand containers and a trailer-mounted model. The SludgeKing II is a roll-off dewatering container by Park Process engineered to eliminate trapped water from the bottom of the filter cake. A second center wall filter increases the filter area by 33%, producing drier cakes in less time. Plastic floor panels hold down the bottom of the filter elements, eliminate standing water and facilitate the dumping of filter cake. The inlet manifold is split into three ball-valved inlets that evenly distribute incoming flow into three compartments. The BigTipper is a permanently mounted dewatering box that incorporates a SludgeKing into its design. A hydraulic power pack tips the container for dumping and controls the operation of the rear door. The mounted legs can be extended for dumping onto a pad or into a roll-off box, dump truck or end dump trailer. BigTippers are available in sizes 5 to 60 cubic yards. The Big Rolling Tipper is a SludgeKing mounted on a trailer. This allows the waste hauler to transport the dewatered waste directly to the landfill without hiring a subcontractor. Big Rolling Tippers are available in sizes 3 to 20 cubic yards. Park Process’ PolyCat is a batch-type polymer mixing and injection system always used in conjunction with the SludgeKing, BigTipper and Big Rolling Tipper. The PolyCat uses less polymer than the typical in-line systems to accomplish the same flocculation process. process.parkusa.com Booth #6273

COLE Publishing  |  PO Box 220  |  Three Lakes, WI 54562 Click here to modify your preferences or unsubscribe.